This is a pair of Jackson's Alu-Pro Aluminium Stretcher bars with a profile dimension of 25 x 65mm, offering maximum stability for building custom canvases.
Alu-Pro Stretcher Bars combine a spruce outer frame with a rigid aluminium structure. The smooth wooden surface sits against the canvas and accepts staples, pins, and nails, while the aluminium frame holds the components securely together and helps maintain stability as the canvas expands and contracts in response to changing humidity.
The stretcher bars are quick and easy to assemble using a 4mm Allen key, and crossbars can be added later for additional support. To join horizontal and vertical stretcher bars at a 90° angle, you will need four Alu-Pro Corner Connectors per canvas frame. A 4mm Allen key is also required, preferably an Alu-Pro Allen Key.
Crossbars strengthen Alu-Pro frames and provide a convenient point from which to carry the canvas. A Primary Crossbar is recommended when the longest side of the canvas exceeds 120cm. If the longest side exceeds 240cm, a Secondary Crossbar is also required.
When using a single Primary Crossbar, it should brace the two longer sides of the frame. Select a crossbar that is the same length as the two shorter sides.
For step-by-step guidance, see A Guide to Stretching Canvas on the Jackson’s Blog.
For more information about Alu-Pro products and assembly tutorials, see the Alu-Pro product showcase on the Jackson’s Blog.
This is a pair of 50cm Jackson’s Alu-Pro Museum Aluminium Stretcher Bars with a 25mm slim profile.