Jackson’s Alu-Pro Secondary Crossbars have a depth of 18mm and are compatible with all Jackson’s Alu-Pro Aluminium Stretcher Bars and Primary Crossbars. A Secondary Crossbar is required when the longest side of the canvas exceeds 240cm.
Secondary Crossbars are installed in the same way as Primary Crossbars. They should be positioned at right angles to the Primary Crossbar, attaching centrally to its sides and to the middle of the inner edge of each stretcher bar.
Each Secondary Crossbar is secured with one Support Connector and one Cross Connector. A complete installation therefore requires two Support Connectors and two Cross Connectors.
To construct a frame with one Primary Crossbar and two Secondary Crossbars, you will need:
- 1 x 4mm Allen key, preferably an Alu-Pro Allen Key
- 4 x Jackson’s Alu-Pro Aluminium Stretcher Bars in your chosen sizes
- 1 x Primary Crossbar matching the length of the shorter sides of the frame
- 2 x Secondary Crossbars
- 4 x Alu-Pro Corner Connectors, sold individually
- 4 x Alu-Pro Support Connectors for attaching the crossbars to the stretcher bars, sold individually
- 2 x Alu-Pro Cross Connectors for securing the joins between the Primary and Secondary Crossbars, sold individually
Please refer to the table to determine when Primary and Secondary Crossbars are required and which components are needed for assembly.
For more information about Alu-Pro products and assembly tutorials, see the Alu-Pro product showcase on the Jackson’s Blog.
This is a set of two Jackson’s Alu-Pro Museum Secondary Crossbars for a 180cm frame.